CARPRO SPOTLESS HARD WATER SPOT REMOVER 2.0
- Regular price
- Rs. 1,298.00
- Regular price
-
Rs. 1,899.00 - Sale price
- Rs. 1,298.00
- Unit price
- per
Product Type : CLEANERS
Sku : CC-spotless 500ml-1
Couldn't load pickup availability
The CarPro Water Spot and Mineral Remover works well with the CarPro cQuartz and the CarPro GLISS and other CarPro top-of-the-line products.
FOR BODY PAINT:
Wash the vehicle with Reset, rinse, and dry the paint. Work indoors or in the shade on cool panels. Prepare 2 damp Terry Weave Towels. Spray Spotless 2.0 directly onto the panel or into 1 damp Terry Weave Towel and spread on the affected area. Allow 30 seconds to 1 minute for Spotless 2.0 to break down the minerals on the surface before wiping the affected area to help loosen the mineral deposits. Do not let the chemical dry on the surface, wipe off with a 2nd, damp Terry Weave Towel or apply Spotless 2.0 again. Repeat if necessary. After cleaning each panel, thoroughly rinse the panel with running water and dry it before moving to the next panel.
FOR EMBLEMS AND WHEELS:
Clean the area with Reset, rinse, and dry the surface. Always test in an inconspicuous area first. Spray Spotless 2.0 onto an applicator, microfiber or brush of your choice and apply to the affected area 1 section at a time. Allow Spotless 2.0 to dwell on the affected area for 30 seconds to 1 minute without letting it dry before agitating to help break up the mineral deposits or stains. Repeat if necessary. Rinse thoroughly with running water after cleaning each area and dry.
TEXTURED PLASTICS:
Clean the plastics with Reset, rinse and dry. Spray Spotless 2.0 directly on the textured plastic or apply to a damp microfiber towel and wipe it onto the surface generously to allow it to get into the pores. Allow Spotless 2.0 30 seconds to 1 minute to break down the mineral deposits and contamination before using a detailing brush to agitate and work the contamination out of the pores. Repeat if necessary. Rinse thoroughly with running water after clean each section and dry.
FOR GLASS:
Apply Spotless 2.0 onto a Terry Weave Towel and spread on glass, allowing to dwell for 30 seconds to 1 minute. Use the same Terry Weave Towel to polish the glass to agitate the minerals or for stubborn water spots apply some Spotless 2.0 to a polishing pad and polish the glass by machine or by hand. After spot removal thoroughly rinse the glass and adjacent panels with running water or wash with car shampoo and dry.
PRECAUTIONS:
- Do NOT use in sun.
- Do NOT use on hot surface.
- Do NOT spray directly on glass. Use with caution, buff in and off instantly and neutralize.
- Wear disposable gloves while working to avoid possible skin irritation.
- Test in an inconspicuous area of any new material before using elsewhere.
- Do not ingest.
- Do not inhale.
- Keep out of reach of children.
- Do not spray in eyes, wear eye protection to be safe.
- May affect windscreen/window coatings and traditional sealants and waxes